3Com v6100 Installation Manual page 44

Hide thumbs Also See for v6100:
Table of Contents

Advertisement

Table 5
ini and Auxiliary Files Descriptions
File Type
Description
Ini
Load the file to provision the V6100 parameters. The Embedded Web Server enables
practically full device provisioning but customers may occasionally require new feature
configuration parameters in which case this file is loaded.
Note that loading the ini file only provisions parameters that are contained in the ini file.
If a parameter is not specified in the ini file, values associated with that parameter are
reset to a default value. These values may not be the same as the values that were
configured for the VoIP gateway at the time of manufacture.
CAS
Up to 8 different CAS files containing specific CAS protocol definitions.
These files are provided by 3Com to support various types of CAS signaling.
Voice Prompts
The voice announcement file contains a set of Voice Prompts to be played by the
V6100 during operation on Call Agent request.
Call Progress
This is a region-specific, telephone exchange-dependent file that contains the Call
Tones
Progress Tones levels and frequencies that the VoIP gateway uses. The default CPT
file is: U.S.A.
To load an auxiliary file via the Embedded Web Server, follow these 6 steps:
1
Open the 'Auxiliary Files' screen (Software Update menu > Load Auxiliary Files); the
'Auxiliary Files' screen is displayed (shown in
2
Click the Browse button that is in the field for the type of file you want to load.
3
Navigate to the folder that contains the file you want to load.
4
Click the file and click the Open button; the name and path of the file appear in the field
next to the Browse button.
5
Click the Send File button adjacent to the field that contains the name of the file you
want to load. An asterisk in the screen section indicates that the file's loading takes effect
on-the-fly (e.g., Voice Prompts file).
6
Repeat Steps 2 to 5 for each file you want to load.
44
After the file has completed loading, the VoIP gateway automatically
restarts (software is loaded from the flash).
Figure
21).
V6100 Digital Gateway Installation Guide

Advertisement

Table of Contents
loading

Table of Contents