DisplayPort and HDMI, which support 10-bit color depth.
Five customizable easy-to-switch picture modes (see page 13).
Accurate color reproduction for high-end graphic design (see page 17).
Quick warmup time.
Picture-In-Picture/Picture-By-Picture dual-screen mode includes real-time preview (see page 14).
USB hub with two upstream ports (see page 14).
MultiProfiler extends color management feature, including automatic ICC profile updates (ICC profile Emulation,
Printer Emulation) (see page 17).
Small footprint design.
For box contents, please refer to the printed contents sheet provided in the box.
To connect the LCD monitor to your system, follow these instructions:
Make sure to read "Recommended Use" (page 3) before installation.
The accessories included depends on the location where the LCD monitor was shipped.
1. Turn off the power for your computer.
2. For a PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system
(Figure A.1). Tighten all screws.
For a PC with Analog output: Connect a Mini D-Sub 15-pin to DVI-A signal cable to the connector of the display card in
your system (Figure A.2).
For a MAC with Thunderbolt or Mini DisplayPort output: Connect a Mini DisplayPort to DisplayPort cable to a video
connector in your system (Figure A.3).
For a PC with DisplayPort output: Connect the DisplayPort cable to the connector of the display card in your system
NOTE: • Please use a Certified DisplayPort cable.
• When removing the DisplayPort cable, hold down the top button to release the lock.
• Please use a High Speed HDMI cable with the HDMI logo.
CAUTION: Use the attached specified cables with this monitor so as not to interfere with radio and television reception.
For DVI and mini D-Sub 15-pin, please use a shielded signal cable with ferrite core.
For HDMI, DisplayPort, USB and AUDIO, please use a shielded signal cable. Use of other cables and
adapters may cause interference with radio and television reception.
Mini D-Sub 15-pin signal cable
Mini DisplayPort to DisplayPort cable