NEC MultiSync P243W User Manual page 17

OFF MODE
The Intelligent Power Manager allows the monitor to enter into a power saving mode after a period of inactivity.
The OFF MODE has four settings.
OFF: The monitor does not go into power save mode when the input signal is lost.
STANDARD: The monitor enters power save mode automatically when the input signal is lost.
ADVANCED: The signal detection circuit always works. Recovery time to normal mode is faster than STANDARD.
Power consumption is slightly higher than STANDARD.
NOTE: When set to STANDARD, if the image does not reappear when the signal is restarted, please change the
setting to ADVANCED.
OPTION: Monitor enters power save mode automatically when the amount of surrounding light goes below the level
that is determined by the user. The level can be adjusted in the OFF MODE SETTING in Tag 6 of the Advanced
OSD menu.
When in power save mode, the LED on the front of the monitor blinks amber. While in power save mode, push any
of the front buttons, except for POWER and INPUT, to return to normal.
When the amount of surrounding light returns to normal levels, the monitor will automatically return to normal mode.
MENU Tools
LANGUAGE
OSD control menus are available in nine languages.
OSD LEFT/RIGHT
You can choose the location where you would like the OSD control image to appear on your screen. Selecting OSD
Location allows you to manually adjust the position of the OSD control menu left or right.
OSD DOWN/UP
You can choose the location where you would like the OSD control image to appear on your screen. Selecting OSD
Location allows you to manually adjust the position of the OSD control menu Up or Down.
OSD TURN OFF
The OSD control menu will stay on as long as it is in use. You can select how long the monitor waits after the last touch
of a button to shut off the OSD control menu. The preset choices are 10-120 seconds by 5-second increments.
OSD LOCK OUT
This control completely locks out access to all OSD control menu functions. When attempting to activate the OSD
controls while in the Lock Out mode, a screen will appear indicating the OSD controls are locked out.
There are three types of OSD LOCK OUT:
OSD LOCK OUT with no control: To activate the OSD LOCK OUT function, press the SELECT and "RIGHT" buttons
simultaneously. To deactivate the OSD LOCK OUT, press the MENU button to show the OSD LOCK OUT message
on-screen, then press the SELECT and "RIGHT" buttons simultaneously. No controls can be adjusted while in the lock
out mode.
OSD LOCK OUT with BRIGHTNESS and VOLUME control: To activate the OSD Lock Out function, press SELECT,
then "DOWN" and "LEFT" buttons and hold down simultaneously. To deactivate the OSD Lock Out, press SELECT,
then "DOWN" and "LEFT" buttons and hold down simultaneously while in the OSD menu. BRIGHTNESS and VOLUME
can be adjusted while in this lock out mode.
CUSTOM: Refer to the Advanced OSD Menu.
OSD TRANSPARENCY
Adjusts the transparency of the OSD Menu.
OSD COLOR
Adjusts the color of the OSD Menu. "Tag window frame color", "Item select color" and "Adjust window frame color" can
be changed to Red, Green, Blue, or Gray.
RESOLUTION NOTIFIER
If ON is selected, a message will appear on the screen after 30 seconds, notifying you that the resolution is not the
optimal resolution.
English-15