NEC MultiSync P243W User Manual page 25

RESOLUTION
NOTIFIER*
1
HOT KEY*
1
FACTORY PRESET
Tag8 VOLUME
SOUND INPUT
MULTI PICTURE
AUDIO
AUDIO DELAY
DP EDID SOUND
SELECT
MULTI PICTURE
ACTIVE PICTURE
EXPANSION
PIP LEFT/RIGHT
PIP DOWN/UP
PIP SIZE
Tag9 TILE MATRIX
* This item does not reset by FACTORY PRESET (Tag7).
1
If ON is selected, a message will appear on the screen after 30 seconds, notifying you
that the resolution is not the optimal resolution.
When this function is activated; the VOLUME of the monitor can be adjusted without
entering the OSD menu by using the front buttons.
The "LEFT" or "RIGHT" button adjusts the VOLUME level.
The "UP" or "DOWN" button selects the PICTURE MODE.
When this function is set to OFF, some buttons are disabled. See page 11.
Selecting FACTORY PRESET allows you to reset all OSD control settings back to the
factory settings. Highlighting the control to be reset and pressing the RESET button can
reset individual settings.
Controls the volume of the speakers or headphones when set to other than OFF in
MULTI PICTURE.
To mute the sound output, press the "RESET" button.
Selects the sound input port when set to other than OFF in MULTI PICTURE.
A red frame is displayed on selected picture.
NOTE: When DP EDID SOUND SELECT is OFF, DisplayPort signal will not emit any sound.
Selects audio source.
NOTE: This function is available when the MULTI PICTURE is set to PIP (Picture-In-
Picture) or PBP (Picture-By-Picture).
For synchronizing of sounds and images, delay the audio output timing.
When OFF is selected, DisplayPort signal will not emit any sound.
You can select "OFF", when DisplayPort signals do not optimize on the native resolution.
Selects MULTI PICTURE MODE, OFF/PIP/PBP (Picture by Picture)
Selects active picture when set to other than OFF in MULTI PICTURE. A white frame is
displayed on selected picture.
Sets the zoom method.
FULL: The image is expanded to full screen, regardless of the resolution.
ASPECT: The image is expanded without changing the aspect ratio.
OFF: The image is not expanded.
When you select "PIP" in PIP MODE, you can control horizontal position of PIP display area.
When you select "PIP" in PIP MODE, you can control vertical position of PIP display area.
Selects the size of the sub-picture used in PIP MODE.
The TILE MATRIX feature allows one image to be displayed over multiple screens. This
feature can be used with up to 25 monitors (5 vertical and 5 horizontal). Using TILE
MATRIX requires the PC output signal be sent through a distribution amplifier to each
individual monitor.
H MONITOR: Select the number of horizontal displays.
V MONITOR: Select the number of vertical displays.
MONITOR No: Select a position to expand the screen.
TILE COMP: Works in tandem with TILE MATRIX to compensate for the width of the tile
bezels in order to accurately display the image.
Tile Comp with 4 monitors (black area shows monitor frames):
monitor1 monitor2
monitor4
monitor3
Tile Comp OFF
NOTE: TILE MATRIX works only when PIP MODE is OFF.
English-23
monitor1 monitor2
monitor3 monitor4
Tile Comp ON