Victron energy Color Control GX Manual page 29

Color Control GX manual [Victron Energy]
Thanks,
Thorsten
Reply
△ ▽
•
Johannes Boonstra
No sorry. Thats for the VenusGX only i am afraid.
△ ▽
Klaus Korosec
Hi Victron-Team!
I have the follwing configuration: 3 x Multi 24/5000, 2 x Smart Solar 250/100, 1 x CCGX, BMV 702,
opz 24 Volt 2100 Ah, Photovoltaic 4,7 kW peak. On every item thenewest software. ESS is
running, no feed in to the grid. Now the problem: although the battery is full at 100% and the load
is about only 1 kW at the AC out, the upper green light on the right side is flashing. The manual
says, that the mains are switched trough and the load requieres more more current. I really don't
understand this. Why is the AC switched trough? I think there is power enough in the battery.
Please could you be so kind to have a look at the problem? a0f6fd73bcf9 is my ID.
thank you very much.
Greetings from Austria
Klaus
Reply
△ ▽
•
Johannes Boonstra
The manual refers to default operation, Not ESS usage.
The AC is in fact in pass through mode (but power to the grid is controlled to be 0 Watt). As
soon as there is a peak power needed for the load the grid is there.
the blinking light in ESS means the inverter is supplementing power from DC into the AC
system (the loads in your system)
So all quite normal
△ ▽
Gram Schweikert
have a ccgx that won't boot past the blue start up screen.....flashes blue victron logo for a second,
then reboots. Tried putting latest firware on an ssd, and holding button E, but it reboots before it
gets anywhere with that.
It was installed without a fuse, and was installed with oversize supply wires, so there is a chance it
https://www.victronenergy.com/live/ccgx:start
Share ›
•
> Thorsten F
Mod
Reply Share ›
• •
•
a month ago
Share ›
•
> Klaus Korosec
Mod
Reply Share ›
• •
Klaus Korosec
> Johannes Boonstra
Johannes thank you for your answer.
Reply Share ›
2 △ ▽ • •
•
2 months ago
•
a month ago
•
a month ago
•
a month ago
2018-07-31, 10*05 AM
Page 29 of 32