Victron energy Color Control GX Manual page 28

Color Control GX manual [Victron Energy]
System charges from 2 sources (solar and grid).
What do you recommend to have voltage sense and battery temperature sensor to compensate
battery status when charging? some options that I can think are:
Option 1: Using Smart Battery Sense - can mppt charger forward the readings to the Venus GX?
Option 2: Connecting to the Venus GX temperature sensor ASS000001000 (how the VenusGX can
measure the voltage of batteries? will it be helpful to connect the supply cables of Venus GX as
close as possible to the battery?)
Option 3: Use Multigrid I that has voltage sense and temperature sensor included.
Regards,
Spyros
Reply
△ ▽ •
Johannes Boonstra
1/ smart battery sense is only for a bluetooth networking, not for when installed a VenusGX.
2/ the information will come form the connected devices as the Multigrid.
△ ▽
Sven Nurber
Hi Victron. Have an installation with x2 Lynx Shunt 1000A VE.Can. How can I change the name of
each so that customer can more easily distinguish ?
Reply
△ ▽ •
Johannes Boonstra
At the moment that is not an option.
The CAN instance could be set to 0 (for display on overvieuw and devicelist) or 1 for only
appear in the device list.
△ ▽
Thorsten F
• a month ago
Hi Victron Team,
is there a possibility to connect a heating-sensor to my CCGX?
Just to display the actual Temperature of the heating on the CCGX.
Thanks,
https://www.victronenergy.com/live/ccgx:start
Share ›
•
> Spyros Tziakouris
Mod
Reply Share ›
• •
Spyros Tziakouris
> Johannes Boonstra
thanks Johannes
Reply Share ›
△ ▽ • •
•
a month ago
Share ›
•
> Sven Nurber
Mod
Reply Share ›
• •
• a month ago
• a month ago
•
a month ago
2018-07-31, 10*05 AM
Page 28 of 32