Victron energy Color Control GX Manual page 21

Color Control GX manual [Victron Energy]
#3: BMS disabled charging
#4: BMS disabled discharge
#5: Slow Charge in progress (part of BatteryLife, see above)
#6: User configured a charge limit of zero.
#7: User configured a discharge limit of zero.
4 More information resources
CCGX Genset start/stop (/live/ccgx:generator_start_stop)
CCGX Frequently asked questions (/live/ccgx:ccgx_faq)
CCGX Firmware upgrade to v2.00 or later (/live/ccgx:firmware_upgrade_to_v2)
CCGX Manually updating firmware (/live/ccgx:firmware_updating)
CCGX Remote VEConfigure and remote firmware updates (/live/ccgx:ccgx_ve_power_setup)
CCGX Datasheet [https://www.victronenergy.com/upload/documents/Datasheet-Color-Control-GX-EN.pdf]
CCGX & Fischer Panda generators (/live/ccgx:fischer_panda)
VRM Portal (/live/vrm_portal:start)
VRM Portal - trouble shooting Remote Console (/live/vrm_portal:troubleshooting_ccgx_vrm_connectivity#trouble_shooting_remote_console_on_vrm)
Venus OS - Beta testing (/live/ccgx:beta-testing)
Open source (/live/open_source:start)
DISQUS Comments
645 Comments Victron Live
Recommend
$ 8
Join the discussion...
LOG IN WITH
Yang
•
3 days ago
Hi Victron
We've got a system originally configurerd for AGM/Gel, changing over to 2 x 12.8V LiFo4 Smart
with vE BMS and AC Mains Detector.
Setup: EasySolar 24/3000 with CCGX.
VEBMS connected to MultiPlus via Mains Detector. Also connected to LiFo4 3pin comms. With VE
BMS connected, CCGX sees a Multi on device list, but isn't recognising Multi. Since the comms is
direct between Multi and BMS, I suspect BMS the reason why the multi isn't detected.
Firmwares are all up to date. VE Configured with Assistant.
Any ideas that could help would be appreciated. If you have a full wiring diagram for this setup
available to help troubleshoot that'll be much appreciated.
Reply
△ ▽
•
Johannes Boonstra
https://www.victronenergy.com/live/ccgx:start
⤤ Share
OR SIGN UP WITH DISQUS
Name
Share ›
•
> Yang
?
2018-07-31, 10*05 AM
! Login
Sort by Newest
Page 21 of 32