Victron energy Color Control GX Manual page 27

Color Control GX manual [Victron Energy]
extra charge controller (connected to wind turbine), extra 3 batteries, generator, 2 extra solar
panels and color control GX panel. So can I attach the Color control GX directly to the 12V (from
battery to power it) and also to connect the color control to the charge controllers do I just use any
CAT 5 cable from the VE.Bus output to the charge controller and then connect that charge
controller to the other charge controller. Thanks Chris
Reply
△ ▽
•
Chris Downham
This is the diagram that the Victron supplier drew for me. Just that the color control is just
sat without power and not sure on which outputs (from color control) and inputs to MPPT
Charge Controller to use.
△ ▽
Spyros Tziakouris
Regarding the DVCC and using the following products:
- Victron Multigrid II
- SmartSolar mppt charger (e.g. 150/35)
- Venus GX
https://www.victronenergy.com/live/ccgx:start
Share ›
•
> Chris Downham
Reply Share ›
• •
Johannes Boonstra
Mod
Hello Chris,
I am sorry to inform you but this blog is not intended for this. Please contact the
supplier or a experienced installer to have this dine for you.
Reply Share ›
△ ▽ • •
• a month ago
•
a month ago
⛺
see more
•
> Chris Downham a month ago
2018-07-31, 10*05 AM
Page 27 of 32