FingerTec Face ID2 Quick Start Manual

START
HARDWARE
INSTALLATION
Refer to hardware user manual /
installation guide/AdapTec AC & Plus
installer manual (consult qualified
installer)
1
FingerTec Terminal
Installation
Quick Start Guide
Face ID2
HARDWARE SETTINGS
Refer to hardware user manual
2
User Enrollment
Face, Fingerprint,
Card, password
3
Communication
Settings
DAILY OPERATION
*Refer to TCMS V2 Manual
13
Download Data From
Terminal To Computer
14
Exporting Data Into Third Party
Software (i.e. Payroll)
* Skip this step if you are NOT using third party
software
15
View & Print Report
COMPLETE
SOFTWARE
INSTALLATION
*Refer to TCMS V2 Manual
4
TCMS V2 Installation
V2
TCMS
SOFTWARE SETTINGS
01101101100010010
*Refer to TCMS V2 Manual. SET ALL if using both functions.
10111010111010001
0111001101000101
011011011100101010
0100100101110010
For Time Attendance Functions
0110110110001110
1011101011101010
(Skip steps 8 & 9 if you are NOT using time attendance functions)
0111001101001001
01101101110010101
0101010101101001
8
9
For Door Access Functions
(Skip steps 10,11 &12 if you are NOT using door access functions)
10
11
12
For more info go to http://user.fingertec.com
SOFTWARE SETTINGS
*Refer to TCMS V2 Manual
5
TCMS V2 Initial
6
Download user information
Download user, face, fingerprint, card
and password from terminal to computer
with TCMS v2
7
User Information
Fill up user information in TCMS V2
Settings of Working Time & Group
Assign Users To Working Group
Time Zone & Access Code Settings
Assign User With Access Code
Upload Settings to Terminal