5-2) Record Mode - Samsung SMO-210DN User Manual

5-2) RECORD MODE

RECORD MODE
RECORD TYPE
PICTURE QUALITY
PICTURE RATE
DISK END MODE
DISK END ALARM TONE
RECORD TIME MARK
RECORD TITLE MARK
1. RECORD TYPE
- Select channel to simultaneously record video and audio.
- [ALL/CH1/CH2/CH3/CH4/CH5/CH6/CH7/CH8]
- Set the channel on which audio is to be recorded or select ON/OFF using
Use
- Selected channel will be shown as S on screen.
- Upon selecting ALL in the menu, although you choose SINGLE CH, if the singal comes out to
MULTI CH, "S" marker is displayed on the screen.
- In the SINGLE CH mode, when you record the signal and playback what is recorded on the
HDD, "CHANGE MODE" is displayed and playback SINGLE CH only.
Also, when you will change mode to "MULTI CH" while the SINGLE CH is playback
"1CH PB MODE" marker on the screen is displayed and you can't change to MULTI CH.
Press the STOP KEY to change to MULTI CH.
2. PICTURE QUALITY
- Quality of the video to be recorded is defined in three stages. HIGH means quality of the video to
be recorded is the highest, then NORMAL, then LOW.
[NORMAL/HIGH/LOW]
- Select video quality using
05/01/05 00:00:01
OFF
Normal
60 IPS
STOP
0N
0N
0N
key to change selection.
, , ,
English-5-4
key. Use key to change it.
, , , key.