Samsung SMO-210DN User Manual page 57

4. POST ALARM TIME LIMIT
- Recording is performed up to the time set in MAIN ALARM TIME. Then data is further recorded
up to the time set in POST ALARM TIME LIMIT.
[OFF ,10SEC ,20SEC ,30SEC ,1MIN ,2MIN ,3MIN ,4MIN ,5MIN]
- Use , , , ,
5. MOTION DETECTION
- When MOTION DETECTION is set to ON, recording will start whenever a motion in the input
video is detected.
[ON/OFF]
- Use , , , ,
6. SENSITIVITY
- MOTION DETECTION SENSITIVITY can be set when user set the MOTION DETECTION.
There are three stages -- HIGH/NORMAL/LOW.
[HIGH/NORMAL/LOW]
- Use , , , ,
7. MOTION CH SETUP
- Set the channel that you want to detect MOTION.
MOTION CH SETUP
CAMERA1
CAMERA2
CAMERA3
CAMERA4
CAMERA5
CAMERA6
CAMERA7
CAMERA8
MOTION AREA : ON[FULL] OFF[EMPTY]
- MOTION can be detected only on channels that are set to ON.
The following screen shows that MOTION recording is in progress when MOTION happens. It
shows MOTION happens on channels 1 and 2. An "M" mark is displayed next to each channel
title to show that MOTION happens.
[ON/OFF]
CAM1 CAM2
M CAM4 CAM5
CAM7 CAM8
key to make changes.
key to make changes.
key to make changes.
05/01/05 00:00:01
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
05/01/05 00 : 00 : 01
CAM3
CAM6
English-5-9