Table of Contents
Advertisement
3-5) EVENT LIST MENU function setting
You can check the ALARM/LOSS EVENT LIST. If you click the UP/DOWN button to select
5. EVENT LIST in the SETUP MENU and click the ENTER button, the following screen will be
e-36
displayed.
[EVENT LIST]
MM/DD/YY HH:MM:SS CH
1. 08/01/03 12:30:01 A 01
2. 08/01/03 12:29:01 L 03
3. 08/01/03 12:28:01 L 01
•
The latest information on Alarms and Loss Detects will be stored.
This system stores up to 50 events (10 x 5 pages) staring from the latest one.
You can click the UP/DOWN button to check the list of other pages.
•
Press the MENU button to return to the SETUP MENU.
All Pages
1 / 5
Current Page
Information on the Channel
Where an Event Took Place
A:Alarm
Event Information
L:Loss
Event Occurrence Time
Chapter 4: DISPLAY MODE setting method
4-1) SINGLE SCREEN DISPLAY
The initial display mode is QUAD A mode. Use the UP and DOWN buttons to select the channel you
want to view on a single screen, and then press the ENTER button. The channel you selected will be
displayed on a single screen.
Alternatively, you can press the corresponding channel number key on the remote control to switch to a
single screen.
09/01/03 12:30:00
QUAD-A
CAM1
CAM2
CAM3
CAM4
INITIAL DISPLAY STATUS
09/01/03 12:30:00
Display
CAM1 by
CAM 1
Up/Down
Button
FULL SCREEN DISPLAY of CAM1
09/01/03 12:30:00
QUAD-A
CAM1
CAM2
CAM3
CAM4
Press ENTER
Select CAM2 by the
button after
Up/Down button
selecting CAM2
09/01/03 12:30:00
CAM 2
FULL SCREEN DISPLAY of CAM2
e-37
Advertisement
Table of Contents
