Connection Mode; Network Setting - Samsung SDH-C75080 Quick Start Manual

4.
After filling in the information, Click <OK>.

network Setting

❒ connection Mode

1.
Click on Network and select <connection Mode>.
If there occur a problem with Connection Mode, check the connection
as "installing your system" on page 1.
If you still have a problem, contact the nearest service center for more
information.
2.
Under <interface> Tab.
Check <iP type> is set to <DhcP> as default.
If it connected successfully, you can see the success comment
If you know Static IP information from your router, please select
J
<Static IP> and enter IP address, Gateway, and Subnet Mask etc.
Please refer to the Router Guide in provided CD when you use a static IP.
M `
3.
Under <Port> Tab.
Write down <Device Port> and <HTTP Port>.
J
iP address
1
Device Port
2
4.
When completing the setting, click <OK>.
httP Port
3
1
2
3
English
_5