Table of Contents
Advertisement
Connecting to the network using router
SME-2220N/4220N/4221N/4220P/4221P
By using a router, you can connect your computer and 1 ~ 3 DVR machines to the internet by sharing 1 internet connection via
xDSL or cable modem.
This installation guide aims at casual users, not for network professionals.
DVR
DVR
Local PC
For proper use of the router, strictly follow the steps 1 to 5.
Configure your router, computer and DVR equipments as described in the following steps.
Step 2. Connecting your local computer to the router
Step 3. Connecting DVR to the router
Step 4. Connecting the router to the internet service line
Step 5. Configuring router's port forwarding
Step 6. Accessing DVR using DDNS service in dynamic IP environment
xDSL or
Cable Modem
IP Sharer
(websamsung.net)
English-1
INTERNET
xDSL or
Cable Modem
DDNS Server
External
Remote PC
Advertisement
Table of Contents
Related Manuals for Samsung SME-2220N
Summary of Contents for Samsung SME-2220N
- Page 1 Connecting to the network using router SME-2220N/4220N/4221N/4220P/4221P By using a router, you can connect your computer and 1 ~ 3 DVR machines to the internet by sharing 1 internet connection via xDSL or cable modem. This installation guide aims at casual users, not for network professionals.
- Page 2 Step 1. Connecting Cables Connect the internet service line (xDSL/Cable Modem) Cable/ADSL/VDSL IP Router to your router’s Internet (WAN) port. INTERNET Connect Ethernet cables from your computer and DDNS Server DVRs to the LAN (1 to 4) ports of the router. (websamsung.net) Direct LAN (Dynamic/Static IP)
- Page 3 Select <Obtain an IP address automatically> and <Obtain DNS server address automatically>, and click [OK] button. Click [OK] button to finish the setup. Step 2.2 Confirming the Connection Click [Start] on your computer. Click [Run…]. On the appeared command dialog, type ‘cmd’ in the <Open> box and click [OK].
- Page 4 If the connection does not establish, check all cable connections and go to step 2.1 and select <Repair>. On the “Local Area Connection Status” window, click <Support> tab and check <Default Gateway> if matches to the one found in the [cmd.exe], and check the connection again. Step 3.
- Page 5 Step 3.2 Checking DVR connection on your computer Run the Internet Explorer, and enter the <IP ADDRESS> and <WEB SERVER PORT> of the DVR into the address, and press [Enter]. ex) http://192.168.1.200:8080 If the connection establishes properly, the Web Viewer screen appears.
- Page 6 Select internet connection method from connection setup wizard and manual setup. Selecting the Internet Connection Setup Wizard automatically moves to the next step. For manual setups, click <Manual Configure>. Select your <Internet Connection Type>. Dynamic IP Address Environment Select <Dynamic IP (DHCP)>. Click [Save Settings] button.
- Page 7 ADSL Environment Select <PPPoE (Username/Password)>. Enter your <User Name> and <Password>. Ask your internet service provider for the username and password. Step 4.1-Case 2. NETGEAR WGR614SS Run the Internet Explorer and enter the <Default Gateway> found in Step 2 into the address field and press [Enter]. Enter the user name and password when the router login window appears.
- Page 8 Dynamic IP Address Environment Select <Get Dynamically From ISP>. Click [Apply] button. Static IP Address Environment Select <Use Static IP Address>. Enter <IP Address>, <IP Subnet Mask> and <Gateway IP Address>. Click [Apply] button. It saves the changes. To check the connection Once connected, status indicator <DHCPClient>...
- Page 9 Step 4.1-Case 3. LINKSYS WRT54G Run the Internet Explorer and enter the <Default Gateway> found in Step 2 into the address field and press [Enter]. When the router login screen appears, enter the <User name> and <Password>. Refer to the router user manual for ID and password. Click <Internet Setup>.
- Page 10 Static IP Address Environment Select <Static IP>. Enter <Internet IP Address>, <Subnet Mask>, and <Gateway> assigned by your ISP. Click [Save Settings] button on the bottom. ADSL Environment Select <PPPoE>. Enter your <User Name> and <Password>. Ask your internet service provider for the username and password.
- Page 11 Click <WAN>-<Connection Type>. Select your internet service type. Dynamic IP Address Environment Select <Dynamic> for the connection type and click [Next>] button. Enter the <Host Name> and click [Apply Changes] button. If your ISP provided specific DNS addresses, click <WAN>-<DNS> and enter the provided DNS addresses.
- Page 12 To check the connection Once connected, status indicator <Connection> is displayed on the top side of the settings screen. Step 4.1-Case 5. TRENDNET TEW-652BRP Run the Internet Explorer and enter the <Default Gateway> found in Step 2 into the address field and press [Enter]. Enter the user name and password when the router login window appears.
- Page 13 Static IP Address Environment Select <DHCP Client or Fixed IP>. Select <Specify IP>. Enter the <IP Address>, <Subnet Mask>, and <Default Gateway>. Enter <DNS1> and <DNS2>. If your ISP provided specific DNS addresses, click <WAN>-<DNS> and enter the provided DNS addresses. When finished, click [Apply] button on the bottom.
- Page 14 Step 4.2 Checking the connection to the internet Run the Internet Explorer on your computer. Enter the <Default Gateway> found in the Step 2 into the address field and press [Enter]. Click Status tab on the router menu. Check the WAN (Internet) connection status and WAN (Internet) IP address.
- Page 15 Step 5.1 Port forwarding guide by routers Run the Internet Explorer and enter the <Default Gateway> of the computer, which is the router’s IP address found in Step 2, into the address field and pres [Enter]. Step 5.1-Case 1. D-LINK DIR-330 Select <Advanced>.
- Page 16 . Enter a name for the DVR port in the <Service Name> field. ex) DVR 1_WEB SERVER PORT . Enter the <Starting Port> and <Ending Port> while matching to that of <WEB SERVER PORT> defined in 8080 Step 3. 8080 ...
- Page 17 Click [Save Settings] button on the bottom. Once finished, completion screen appears. Step 5.1-Case 4. BELKIN F5D8236-4 Click <Firewall>-<Virtual Servers> on the left menu. Set the <WEB SERVER PORT> for port forwarding. . Check the <Enable> checkbox to mark selected. .
- Page 18 Step 5.1-Case 5. TRENDNET TEW-652BRP Click <Access>-<Virtual Server> on the left menu. Set the <WEB SERVER PORT> for port forwarding. . Select [Enable] for the item <Enable>. . Enter a name for the DVR port in the <Name> field. ex) DVR 1_WEB SERVER PORT 8080 8080...
- Page 19 Step 6. Accessing DVR using DDNS service in dynamic IP environment Since the router’s WAN IP address may vary in xDSL/Cable connections hiring dynamic IP allocations, DDNS (Dynamic Domain Name Server) service is provided for accessing the DVR with fixed DDNS address in dynamic IP network environments. Step 6.1 DVR DDNS configuration Press [MENU] button and select <SYSTEM SETUP>...