System Requirements; Legal Terms And Conditions; Dynapro And Dynapro V3 Part Number Descriptions - Magtek DynaPro Quick Installation Manual

Pin entry devices secured by the magnesafe security architecture

Programmer's manual (38 pages)

Installation and operation manual (26 pages)

Programmer's reference manual (75 pages)

Table of Contents

Legal Terms and Conditions

PCI SSC's approval applies only to PEDs that are identical to the PED tested by a PCI Security Standards Council recognized laboratory. If

any aspect of the PED is different from that which was tested by the laboratory—even if the PED conforms to the basic product descrip-

tion contained in the letter—then the PED model should not be considered approved, nor promoted as approved. For example, if a PED

contains firmware, software, or physical construction that has the same name or model number as those tested by the laboratory, but in

fact is not identical to those PED samples tested by the laboratory, then the PED should not be considered or promoted as approved.

No vendor or third party may refer to a PED as "PCI Approved," nor otherwise state or imply that PCI SSC has, in whole or part, approved

any aspect of a vendor or its PEDs, except to the extent and subject to the terms and restrictions expressly set forth in a written agreement

with PCI SSC, or in an approval letter. All other references to PCI SSC's approval are strictly and actively prohibited by PCI SSC.

When granted, an approval is provided by PCI SSC to ensure certain security and operational characteristics important to the achievement

of PCI SSC's goals, but the approval does not under any circumstances include any endorsement or warranty regarding the functionality,

quality, or performance of any particular product or service. PCI SSC does not warrant any products or services provided by third parties.

Approval does not, under any circumstances, include or imply any product warranties from PCI SSC, including, without limitation, any im-

plied warranties of merchantability, fitness for purpose or noninfringement, all of which are expressly disclaimed by PCI SSC. All rights and

remedies regarding products and services, which have received an approval, shall be provided by the third party providing such products

or services, and not by PCI SSC or the payment brand participants.

DynaPro and DynaPo v3 Part Number Descriptions

DynaPro v3

DynaPro V1

30056082

30056001

PCI, NO CTLESS, NO SIGCAP, BLACK, USB 6FT

30056002

TST, NO CTLESS, NO SIGCAP, BLACK, USB 6FT

30056083

30056003

PCI, NO CTLESS, SIGNATURE CAPTURE, BLACK, USB 6FT

30056004

TST, NO CTLESS, SIGNATURE CAPTURE, BLACK, USB 6FT

30056070

30056013

PCI, CONTACTLESS, NO SIGCAP, BLACK, USB 6FT

30056014

TST, CONTACTLESS, NO SIGCAP, BLACK, USB 6FT

30056072

30056028

PCI, CONTACTLESS, SIGNATURE CAPTURE, BLACK, USB 6FT

30056029

TST, CONTACTLESS, SIGNATURE CAPTURE, BLACK, USB 6FT

30056084

30056005

PCI, NO CTLESS, NO SIGCAP, BLACK, ETHERNET 6FT

30056006

TST, NO CTLESS, NO SIGCAP, BLACK, ETHERNET 6.75FT

30056007

PCI, NO CTLESS, SIGNATURE CAPTURE, BLACK, ETHERNET 6.75FT

30056008

TST, NO CTLESS, SIGNATURE CAPTURE, BLACK, ETHERNET 6.75FT

30056030

PCI, CONTACTLESS, SIGNATURE CAPTURE, BLACK, ETHERNET 6.75FT

30056031

TST, CONTACTLESS, SIGNATURE CAPTURE, BLACK, ETHERNET 6.75FT

TST devices are for development, and use test keys.

Subjecting the device to temperature extremes (outside of 14°F to 140 °F (-10 °C to 60°C)) can adversely affect the device's

battery life and tamper security switches, which can render the device inoperable and void the warranty.

MAGTEK RECOMMENDS PLUGGING THE UNIT IN AS SOON AS POSSIBLE OR WITHIN ONE YEAR, TO

MAXIMIZE OPERATION.