Introduction; About This Document; System Requirements; How To Download, Install, And Launch The Software - Magtek DynaFlex User Manual

1 - Introduction

1 Introduction
1.1

About This Document

This document provides instructions to use the DynaFlex, DynaProx Utility software for demonstrating
EMV transactions, configuration, and firmware updating. It is part of a larger library of documents
designed to assist implementers. For details, see the product Support pages on www.magtek.com.
1.2

System Requirements


A Windows 10 host with available USB port

Microsoft .NET 4.6.1 and above installed on the host

Microsoft Access Database Engine 2016 Redistributable installed on the host

DynaFlex, DynaFlex Pro, or DynaProx device(s)

USB-C cable with USB Type-A or USB-C for host connection

Software 1000007406 DynaFlex, DynaProx Utility, provided by MagTek
1.3

How to Download, Install, and Launch the Software

To download DynaFlex, DynaProx Utility software, follow these steps.
1) Download the software with the name 1000007406.zip (DynaFlex, DynaProx Utility) from
MagTek.
2) Extract the .zip file on the host's hard drive.
3) Install the AccessDatabaseEngine.exe from the folder Access Database Engine in the extracted
folder.
4) Download and install Microsoft .NET 4.6.1 or above from
https://dotnet.microsoft.com/download/dotnet-framework.
5) Launch DynaFlexUtility.exe.
6) See the steps in the sections below to connect to a device.
DynaFlex, DynaProx| Utility Software | User Manual (Windows)
Page 9 of 35 (D998200402-30)