Linksys WIP310 User Manual page 35

Wireless-G IP Phone
Option Description
Beep Enable or disable the Beep Notification feature. When this feature is enabled, the phone will beep
Notification every 50 seconds so that you can keep track of how long you've been on a call.
Hold Transfer Select SIP or DTMF Flash as the method used for transferring calls.
Regional Tone Set the Regional tone setting to North America or Japan.
Speed Dial
The Speed Dial menu allows you to change the way the phone's speed dial function works. You can select Disable to disable speed dial, Ask to see a
confirmation screen before the phone dials a contact, or Dial to immediately dial a contact.
Sound Settings
The Sound Settings menu allows you to change the IP Phone's speaker volume, ringer settings, and warning tones. Refer to the table below for a list of
options available in the Sound Setting menu.
Option Description
Speaker Volume Set the IP Phone's speaker volume.
Ring Tone Set the IP Phone's ring tone and volume. Press the Select Soft Key to select from the following
options. Default Ring Tone are melodies that came with the Phone. Personal Melody are tones you
uploaded to the Phone using the web-based utility.
• Melody: Allows you to set the IP Phone's ring tone.
• Ring Volume: Allows you to adjust the IP Phone's ringer volume.
Ring Mode Set the IP Phone's ring mode to Silent, Ring, Vibrate, or Ring + Vibrate.
Warning Tone Enable or disable the IP Phone's warning tones, such as low battery.
Open/Close Enables start and shutdown tones for the IP Phone.
Tone
30
Chapter 4: Configuring the Wireless-G IP Phone
Settings