Linksys WIP310 User Manual page 20

24. Press the Navigation button to assign the default SIP account to the current network
profile.
25. Highlight On, then press the Navigation button to activate the SIP Account.
26. Press the Back Soft Key twice so that the Profile Options menu displays. Scroll down
to Auto Detect and press the Select Soft Key.
27. Select On and press the Navigation key. Auto Detect must be turned on in order for the phone to use the
network profile.
28. Press the Back Soft Key until you return to the Phone's home screen.
29. If you are successfully connectected to the network, the ESSID displays on the home screen. For example,
Linksys1, is the ESSID in Figure 3-24.
Installation is complete. Proceed to the next section, "Using the Wireless-G IP Phone."
Chapter 3: Installing and Using the Wireless-G IP Phone
Setting up the Wireless-G IP Phone
Figure 3-20: Select Figure 3-21:
default SIP Account Account Reg. - On
Figure 3-23: Auto
Detect - On
Wireless-G IP Phone
Figure 3-22: Profile
Options - Auto Detect
Figure 3-24: Home
screen
15