Linksys WIP310 User Manual page 30

Option Description
Proxy Address Enter the address of your Internet phone service provider's SIP proxy server.
Advanced Make advanced changes to the SIP account. Press the Select Soft Key to select from the following
advanced options:
• Proxy Port: Allows you to enter the network port of your Internet phone service provider's
proxy server.
• Outbound Address: Allows you to enter the address of your Internet phone service provider's
outbound server.
• Outbound Port: Allows you to enter the network port of your Internet phone service's
outbound server.
• Local Port: Allows you to enter the local network port the IP Phone uses.
• Reg. Timer (sec): Allows you to change the amount of time the IP Phone waits between
registration attempts with the SIP server.
• Codec: Allows you to select Auto, G.711a, G.729a, or G.711u as the codec the phone uses for
encoding and decoding audio.
• Pkt Time(ms): Allows you to change the audio packet size.
• OutBand DTMF: Allows you to enable or disable out-of-band DTMF.
To rename a SIP account, highlight the account you would like to rename, press the Option Soft Key, highlight Rename, then press the Select Soft Key to
rename the SIP account. To delete a SIP account, highlight the account you would like to delete, press the Option Soft Key, highlight Delete, press the Select
Soft Key, then press the OK Soft Key to delete the SIP account.
Roaming
The Roaming menu allows you to set specific parameters for roaming from one wireless access point to another. Refer to table below for a list of options
available in the Roaming menu:
Chapter 4: Configuring the Wireless-G IP Phone
Profile
Wireless-G IP Phone
25