Table of Contents
Advertisement
If the transition mode is set to Swap, the Channel 1 and Channel 2 inputs switch
places. If Follow was selected, the Channel 1 input setting will follow the Channel 2
setting and both will display the same input.
7.2
Overlay Mode
In the Overlay mode both outputs are identical and can display a single image
(single window display mode), two images one over the other, two images side by
side (dual window display mode) or customized window settings.
A selected CH 1 input appears as the main image in a dual window display mode
(such as PiP) or as the only image in a single window display mode.
A selected CH 2 input will appear as the PiP window in the dual window display
mode and will not appear at all in the single window display mode.
The overlay settings item in the Layout menu (see
Window, Picture in Picture (PiP), Picture + Picture (PoP) or Split images. For
example, you can show a live video window on top of a graphic background, or
show two images on screen of the same input channel. The PiP window appears
even if no input signals are connected. In this case the PiP and Main windows appear
as set in Channel 1/2>Advanced>No Signal?>Gray/Blue/Black.
The preset PiP configurations are available:
Picture-in-Picture, with a smaller PiP
window superimposed over a full main
window image
VP-778 - VP-778 Layout
Section 6
.3) lets you set a Single
39
Hide quick links:
Advertisement
Table of Contents
