AON Mesh Web User Interface
Setting up your WMB260AC Whole-Home Wi-Fi Mesh
System as Mesh Controller
WMB260AC Whole-Home Wi-Fi Mesh System is a Mesh-Ready device as a Mesh
Controller. To set your WMB260AC Whole-Home Wi-Fi Mesh System to Mesh
Controller, you will need your WMB260AC Whole-Home Wi-Fi Mesh System as the
main router with internet access. Since WMB260AC Whole-Home Wi-Fi Mesh System
is a Mesh Controller, we need to do initial setup of the controller. The SSID your mesh
system will follow is the SSID of 5.0 GHz network of the controller. (This is provided if
your Smart AP Steering is On. If Smart AP Steering is Off, the 2.4GHz's SSID will remain
as pre-set 2.4GHz SSID).
To set up your Mesh System with WMB260AC Whole-Home Wi-Fi Mesh System as
Mesh Controller:
1. Position your WMB260AC Whole-Home Wi-Fi Mesh System near the
Mesh Controller and plug the power adapter to the mains.
2. Press and hold the WPS button of the Mesh Controller until the WPS LED
starts to blink.
32