WMB260(AC) Web User Interface
The Web User interface allows you to configure your WMB260(AC)'s features.
Accessing the Web User Interface
To access your WMB260(AC) Web User Interface;
1. Launch any web browser (e.g. Internet Explorer, Google Chrome).
2. Type-in 10.0.10.254 on the address bar and then press Enter. This is only for
stand-alone WMB260(AC).
3. If you have connected the WMB260(AC) to a main router as AP/Mesh
Node, access the main router's Web User Interface and check the IP of the
WMB260(AC). After finding out the IP of WMB260(AC), access the Web User
Interface of WMB260(AC) using that IP. WMB260(AC) will be listed as WMB260
in your router connected device list.
E.g.; if IP of the main router is 192.168.1.254, the possible IP of WMB260(AC) will
be 192.168.1.x
Web User Interface
The Web User Interface is subdivided into three (3) different categories:
General
Advanced
Management
14