Table of Contents
Advertisement
Remove/Disable Conflicts
To ensure that the router installation moves on smoothly, you need to remove or
disable conflicts that may interfere with the installation. Probable conflicts may
include:
Internet sharing applications
•
Proxy software
•
Security software
•
TCP/IP settings
•
Internet properties
•
Temporary Internet files
•
Internet Sharing, Proxy, and Security Applications
Internet sharing, proxy software, and firewall applications may interfere with the
router installation. These should be removed or disabled before starting the
installation. If you have any of the following or similar applications installed on your
computer, remove or disable them according to the manufacturer's instructions. If
you have any of the following or similar applications installed on your computer,
remove or disable them according to the manufacturer's instructions.
Internet Sharing
Applications
Microsoft Internet Sharing
WinProxy
Configuring TCP/IP Settings
Check if your computer uses the default TCP/IP settings. Follow the steps below to
check the TCP/IP properties:
1. Select Start > Run. The Run dialog box would appear.
2. Enter control ncpa.cpl on the input box, and then click the OK button. This
would open the Network Connections window in your computer.
3. Right-click LAN and then select Properties. The Local Area Connection
Properties dialog box would appear.
4. Select Internet Protocol (TCP/IP) and then click Properties. The Internet
Protocol (TCP/IP) dialog box would appear.
5. Select Obtain an IP address automatically.
6. Click the OK button to close the Internet Protocol (TCP/IP) dialog box.
7. Click the OK button to close the Local Area Connection Properties dialog
box.
Configuring Internet Properties
Follow the steps below to set the Internet Properties:
1. Select Start > Run. This opens the Run dialog box.
Proxy Software
Win Gate
Zone Alarm
10
Security Software
Symantec
Advertisement
Table of Contents
