The Web User Interface
The Web User interface allows you to configure your WMB260AC Whole-Home Wi-Fi
Mesh System's features.
Accessing the Web User Interface
To access your WMB260AC hole-Home Wi-Fi Mesh System Web User Interface:
1. Launch any web browser (e.g. Internet Explorer, Google Chrome).
2. Type-in 10.0.10.254 on the address bar and then press Enter. This is only for
stand-alone WMB260AC Whole-Home Wi-Fi Mesh System.
3. If you have connected the WMB260AC Whole-Home Wi-Fi Mesh System to
a main router as Mesh Node, access the main router's Web User Interface
and check the IP of the WMB260AC Whole-Home Wi-Fi Mesh System. After
finding out the IP of WMB260AC Whole-Home Wi-Fi Mesh System, access
the Web User Interface of WMB260AC using that IP. WMB260AC Whole-
Home Wi-Fi Mesh System will be listed as WMB260 in your router connected
device list.
E.g. if IP of the main router is 192.168.1.254, the possible IP of WMB260AC
Whole-Home Wi-Fi Mesh System can be 192.168.1.x
Web User Interface
The Web User Interface is subdivided into three (3) different categories:
General
•
Advanced
•
Management
•
Status Icon and Reboot button
The WMB260AC Whole-Home Wi-Fi Mesh System has a top panel which displays a
representation of the Internet Status. A Reboot feature is also available in the top
panel for easier means of soft device reboot.
Internet Status
•
Reboot
•
12