Attach The Rail To The Header Bracket - B&D Controll-A-Door 4 Instructions Manual

Header Wall
Header Bracket
114A2558F
Chain Pulley Bracket
Garage Door
HARDWARE SHOWN ACTUAL SIZE
Clevis Pin
8mm x 71mm
INSTALLATION STEP 3
Attach the Rail to the Header
Bracket
• Position the opener on the garage floor below the
header bracket. Use packing material as a
protective base.
NOTE: If the door spring is in the way you'll need
help. Have someone hold the opener securely on
a temporary support to allow the rail to clear the
spring.
• Position the rail bracket against the header
bracket.
• Align the bracket holes and join with a clevis pin
as shown.
• Insert a ring fastener to secure.
Ring Fastener
Header
Bracket
Clevis Pin
8mm x 71mm
Chain
Pulley Bracket
Rail
Temporary
Support
15
Ring fastener