Cx-Profibus; Starting Cx-Profibus - Omron CS1W-PRM21 Operation Manual

CX-Profibus

3-2

CX-Profibus

3-2-1

Starting CX-Profibus

Starting CX-Profibus
Log in window
Default password
!Caution If access limitation to CX-Profibus is required by the application, the password
Generating the Device
Catalogue
Select Program, OMRON, and CX-Profibus, from the Start Menu if the
default program folder name is used.
At startup, the CX-Profibus splash screen will appear, on top of which a login
window as shown below will be displayed.
The Login window provides the selection of the access level as well as the
entry of the password belonging to the access level selected.
The default password at the first start up of CX-Profibus is " password " and is
applicable to all access levels. Type in "password" (without the quotes) at the
password entry line and select OK.
should be changed as soon as possible. Changing passwords is only possible
on the Administrator level. Refer to Changing the passwords for an explana-
tion on how to change passwords.
After entering the correct password, CX-Profibus will start up and open. The
first time CX-Profibus is started after installations, the device catalogue will
still be empty. Therefore, the following window will be displayed on top of the
CX-Profibus application window.
Select Yes to generate the device catalogue for the first time. This action may
take several minutes depending on the number of installed DTMs.
After updating the device catalogue, it will open in the CX-Profibus application
window.
Section 3-2
47