Replacing The Solid-State Drive/Intel Optane Memory Module; Procedure - Dell Inspiron 5580 Service Manual

Replacing the solid-state drive/Intel Optane
Enable the Intel Optane memory after you replace the Intel Optane memory module. For more information about enabling the Intel Optane
memory, see Enabling Intel Optane
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.

Procedure

NOTE: See Procedure to move the screw mount
state drive/Intel Optane memory module with another that has a different form factor.
1 Align the notch on the solid-state drive/Intel Optane memory module with the tab on the solid-state drive/Intel Optane memory slot.
2 Slide the solid-state drive/Intel Optane memory module firmly into the solid-state drive/Intel Optane memory module slot at an angle.
3 Press the other end of the solid-state drive/Intel Optane memory module and replace the screw (M2x3) that secures the solid-state
drive/Intel Optane memory module to the palm-rest and keyboard assembly.
memory.
computer. After working inside your computer, follow the instructions in
to change the location of the screw mount, in case you are replacing the solid-
memory module

Replacing the solid-state drive/Intel Optane memory module

19
After working inside
www.dell.com/
33