Replacing The Solid-State Drive/Intel Optane Memory Module; Procedure To Move The Screw Mount - Dell G5 5590 Service Manual

Identifier
Status
Replacing the solid-state drive/Intel Optane
Enable the Intel Optane memory after you replace the Intel Optane memory module. For more information about enabling the Intel Optane
memory, see Enabling Intel Optane
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
Identifier
Status

Procedure to move the screw mount

This computer supports two solid-state drive form factors:
• M.2 2230
• M.2 2280
If you are replacing the solid-state drive of a different form factor other than the one removed, see the following procedure to move the
location of the screw mount.
1 Remove the screw mount from the palm-rest assembly.
2 Turn the screw mount to 180 degrees.
3 Insert the screw mount into the other screw mount slot on the palm-rest assembly.
54

Replacing the solid-state drive/Intel Optane memory module

GUID-1876A74B-D56A-47F2-8EDF-F2F19004C8B8
Released
memory.
computer. After working inside your computer, follow the instructions in
GUID-0CE7F8A4-0D41-4985-AB93-DC81FAD1BFAA
Released
memory module
After working inside
www.dell.com/
21