WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Remove the
base
cover.
Procedure
1
Peel the tape that secures the battery cable to the system board.
2
Peel the tape that secures the battery cable connection to the system board.
3
Disconnect the battery cable from the system board.
4
Remove the two screws (M2x3) that secure the battery to the palm-rest and keyboard assembly.
5
Lift the battery off the palm-rest and keyboard assembly.
18
Removing the battery
computer. After working inside your computer, follow the instructions in
Removing the battery
www.dell.com/
8
After working inside