Replacing The Solid-State Drive/Intel Optane Memory Module; Procedure; Post-Requisites - Dell Inspiron 3581 Service Manual

Replacing the solid-state drive/Intel Optane
Enable the Intel Optane memory after you replace the Intel Optane memory module. For more information about enabling the Intel Optane
memory, see Enabling Intel Optane
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.

Procedure

1 Align the notch on the solid-state drive/Intel Optane with the tab on the solid-state drive/Intel Optane slot.
2 Slide the solid-state drive/Intel Optane into the solid-state drive/Intel Optane slot.
3 Align the screw holes on the solid-state drive shield/Intel Optane shield with the screw holes on the palm rest and keyboard assembly.
4 Tighten the two captive screws that secure the solid-state drive shield/Intel Optane shield and solid-state drive/Intel Optane to the
palm rest and keyboard assembly.

Post-requisites

1 Replace the base cover.
2 Replace the optical drive.
memory.
computer. After working inside your computer, follow the instructions in
memory module

Replacing the solid-state drive/Intel Optane memory module

23
After working inside
www.dell.com/
41