Removing The I/O Board; Prerequisites; Procedure - Dell Inspiron 5580 Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the base cover.
2 Remove the fan.

Procedure

1 Peel the tape off the I/O-board connector.
2 Open the latch and disconnect the I/O-board cable from the I/O board.
NOTE: If necessary, use a plastic scribe to open the latch.
3 Disconnect the fingerprint reader cable from the I/O board.
NOTE: Applicable only to computers that are shipped with power button with fingerprint reader.
4 Remove the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
5 Lift the I/O board off the palm-rest and keyboard assembly.
40

Removing the I/O board

computer. After working inside your computer, follow the instructions in
Removing the I/O board
22
After working inside
www.dell.com/