Removing the power button with fingerprint
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE:
Applicable only for computers that are shipped with fingerprint reader.
Prerequisites
1
Remove the
base
cover.
2
Remove the fan.
3
Remove the
display
assembly.
4
Remove the
I/O
board.
Procedure
1
Peel the tape off the palm-rest and keyboard assembly.
2
Remove the two screws (M2x3) that secure the power-button with fingerprint reader to the palm-rest and keyboard assembly.
3
Lift the fingerprint-reader board off the palm-rest and keyboard assembly.
54
Removing the power button with fingerprint reader
computer. After working inside your computer, follow the instructions in
32
reader
After working inside
www.dell.com/