Replacing the solid-state drive/Intel Optane
Enable the Intel Optane memory after you replace the Intel Optane memory module. For more information about enabling the Intel Optane
memory, see
Enabling Intel Optane
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
Procedure
NOTE:
Follow the
procedure
different form factor.
1
Align the notch on the solid-state drive/Intel Optane memory module with the tab on the solid-state drive/Intel Optane memory
module slot.
2
Slide the solid-state drive/Intel Optane memory module firmly into the solid-state drive/Intel Optane memory module slot at an angle.
3
Gently press the other end of the solid-state drive/Intel Optane memory module and replace the screw (M2x3) that secures the solid-
state drive/Intel Optane memory module to the palm-rest and keyboard assembly.
30
Replacing the solid-state drive/Intel Optane memory module
memory.
computer. After working inside your computer, follow the instructions in
to change the location of the screw mount, in case if you are replacing the solid-state drive of a
memory module
After working inside
www.dell.com/
15