Advertisement
Step 2 - Installation
• Place previously assembled bin holder onto desired location.
• One can mount this part to multiple different places. These instructions show them being
mounted to KargoMaster 46" Shelf unit.
• Bolt through existing holes in shelf side panel using a 1/4" x .50" pan head screw.
• Repeat on all four locations.
Step 3 – Optional Installation
• If desired, one can move location of where the unit is installed. Place assembly where
desired, mark through the four holes.
• Drill through the previously marked holes, Replace assembly and bolt the same way as in step
2.
GO BACK AND ENSURE ALL HARDWARE IS TIGHT
Your installation is now complete.
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Installation Instructions – 40370
Page 4
Advertisement
