Automatic Redialing
If the number you have dialed is busy or there is no answer
when you send a fax, the machine will automatically redial the
number every three minutes up to five times by the factory
default settings.
When the display shows "Retry Redial ?," press Enter to redial
the number without waiting. To cancel the automatic redialing,
press Stop/Clear.
To change the time interval between redials and the number of
redial attempts. See page 1.12.
Receiving a Fax
About Receiving Modes
Your machine provides two receiving modes:
• In the fax mode, the machine answers an incoming fax call
and immediately goes into fax reception mode.
• In the tel mode, you can receive a fax pressing Start Copy/
Fax on the control panel of your machine when you can hear
a fax tone from the remote machine.
If the memory is full, the receiving mode automatically switches
to Tel.
For details about changing the receiving mode, see page 1.12.
N
: If you do not want other people to view your received
OTE
documents, you can use the secure receiving mode. In this mode,
all received faxes are stored in the memory. For further details,
see page 5.2.
Loading Paper for Receiving Faxes
The instructions for loading paper in the paper tray are the same
whether you are printing, faxing, or copying, except that faxes
can only be printed on Letter-, A4- or Legal-sized paper. For
details about loading paper and setting the paper size in the
tray, refer to the MFP User's Guide.
G
F
F
ENERAL
AX
UNCTIONS
2
2.7