Within Program Mode, the handheld programmer has two sub-modes of operation:
1.
Navigation Mode
•
Press Mode key
Mode: the rightmost digit of the menu number flashes, and the PROGRAM icon
is not visible.
•
Press Up/Down arrows to change the mode number.
•
Press Right/Left arrows once to move to the next/previous menu.
•
Press Right arrow a second time to change the mode from Navigation to Edit
mode.
2.
Edit Mode
•
In Edit mode, the PROGRAM icon
•
Press the number keys to enter parameter data.
•
Press Right arrow to accept the new value and return to Navigation Mode.
•
Only parameter items can be in Edit mode.
•
In the case of read-only parameters, no change is permitted.
For Quick Access to parameters via the handheld programmer, press Mode key
Note:
to activate PROGRAM mode, then enter the menu number (see
menu structure
on page 49.
Handheld Programmer: key functions in RUN mode
Key
Updates internal enclosure temperature value and displays it in LCD secondary region.
6
Updates echo confidence value and displays it in LCD secondary region.
8
Updates measurement value and displays it in LCD secondary region.
7ML19985JB02
SITRANS Probe LU (PROFIBUS PA) – INSTRUCTION MANUAL
to switch from RUN to PROGRAM and enter Navigation
appears and flashes.
Function
Appendix E: LCD
Page 43