Mounting & Removing The Micrometer; Using An Auxiliary Lens - Accu-Scope 3075 SERIES Manual

ADJUSTMENT
AND OPERATION
Fig. 7
Fig. 8
®
ACCU-SCOPE
(continued)
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
3075 STEREO MICROSCOPE
Mounting & Removing the Micrometer
(Fig. 7)
Unscrew the mounting ring from the eyepiece.
Clean the micrometer and insert it into the
mounting ring with the inscription side up.
Screw the mounting ring back onto the
eyepiece.
To remove the micrometer, unscrew the
mounting ring from the eyepiece, then carefully
take out the micrometer and wrap it in clean soft
paper for storage. Screw the mounting ring
back onto the eyepiece.
Using an Auxiliary Lens (Fig. 8)
The auxiliary lens can be threaded onto the
bottom of the microscope body.
The 0.5x auxiliary lens can be used with most
stands if purchased along with the extension
tube.
The 0.3x and 0.4x auxiliary lenses can only be
used with boom stands, ball bearing stands, or
the flex arm stand.
11