Test Report - Barracuda Networks NG Network Access Client SP4 Administrator's Manual

The following entities are available for rule testing:
List 3–4 Rule Tester parameters – section TEST CONNECTION
Parameter Description
Direction This is the direction of the traffic policy
Application To query for an arbitrary application leave the asterisk (*), which is set as default value. Click the
Update Applications
From: IP / Port Insert Source IP and corresponding connection port. Click the
Protocol Specify which protocol to test. Click the
ICMP into the list.
Time (optional) Insert day of the week and time (optionally). Click the
User (optional) Select an User from the list (Optionally). Click the
Adapter Select an adapter from the list (Optionally). Click the
(optional)
Test Click
List 3–5 Rule Tester parameters – section TEST RESULT
Parameter
Test Status Icon /
Action
Rule
Service
PlugIn
Save Result to
Attribute/Value listing
3.2.6

Test Report

Fig. 3–7 Test Report window
Test reports are saved on a first come first served basis. Test results with
a green icon ( ), test results with
48 Server Config – Personal Firewall Rules
(Incoming
to reset the field to the default value.
Protocol
Test to test the connection and display the test result in the section below.
Description
A connection attempt with the given values can either have failed or have been successful if a rule is applicable. A failed
connection will be indicated by symbol and
symbol and Action field Pass
The Rule field displays the applicable rule responsible for the rule test result. Click
corresponding rule. If the connection attempt has been blocked because no rule has applied, the field will display the string
<No Matching Rule Found>.
This field displays the applicable
If applicable, this field displays the name of the PlugIn that has been employed in the connection.
Insert the report name and click
Test Report view (3.2.6 Test Report, page 48).
This listing displays attributes of the tested connection in detail.
Action Blocked
or Outgoing).
From or To link to
link and select Show all Protocols
Time link and select Insert current Time
User link and select Update Users
Adapter link and select
Action field Block . A successful connection attempt will be indicated by
.
Service Object.
Save Result to to save the test result. The output of the connection test is written to the
are indicated by a red icon ( ).
Application link and Select
Swap IP and/or Port information.
to include other protocols than TCP/UDP and
to insert current day and time.
to clear the field.
Update Adapters to clear the field.
Edit ... to open and modify the
are indicated by
Action Pass