Creating A Connector - Barracuda Networks NG Network Access Client SP4 Administrator's Manual

12.2.1

Creating a Connector

Prior to creating a Barracuda NG VPN connector, the connection profile must be configured
(10.6.8 Advanced Settings Tab, page 143). The connector may then be created using one of two
possible methods.
Fig. 12–1 Creating a Connector
•
•
The checkbox
establishment. Dialling is started automatically after start of the VPN connector.
Click to create the connector or to save the settings that have been made respectively.
Finish
To create a shortcut for quick access, select a connector and drag it to the desktop.
168 Pre-Connector and Remote VPN
Start the VPN client and enter the configuration mode for the required profile
( > Select profile to change >
Preferences
tab >
Settings Pre Domain Logon
page 143).
Browse to >
Start Control Panel
is available in the
Connector
thereafter rename the default profile.
Dial Another Connection First
Options
>
Create Connector ...
>
Network Connections
Virtual Private Network
enables activation of a dial-up connection prior to tunnel
> >
Modify Profile ... Advanced
; see
Advanced Settings Tab
. A default
Barracuda NG VPN
section. Modify or copy and
,