Switch Web Interface - Barracuda Networks NG Network Access Client SP4 Administrator's Manual

To enable or disable verbose the below registry needs to be set:
Table 14–4
Key Logging
Item Description
Path
HKEY_USERS\.Default\Software\phion\phionvpn\settings
Key Logging
Value Enables or disables verbose output to be written (Default=0).
• 0 - disabled
• 1 - enabled
Changing this value takes effect immediately.
This value may also be changed through the
14.2.4

Switch Web Interface

The web interface provides various outputs for monitoring and configuration. These can be viewed in
any web browser. The web interface additionally provides a simple command-line allowing configuring
or showing any settings.
Following sample output shows the 802.1X configuration for the port used in this document.
•
/level/15/exec/-
•
/level/15/exec/-/show/dot1x/interface/fa0\/3/CR
•
show dot1x interface fa0/3
Fig. 14–1 802.1X configuration for the used ports
Supplicant MAC 00a0.c992.0000
AuthSM State
BendSM State
Posture
ReAuthPeriod
ReAuthAction
TimeToNextReauth
PortStatus
MaxReq
MaxAuthReq
HostMode
PortControl
ControlDirection
QuietPeriod
Re-authentication
ReAuthPeriod
ServerTimeout
SuppTimeout
TxPeriod
Guest-Vlan
AuthFail-Vlan
AuthFail-Max-Attempts = 3
Critical Port
These values are described in more details on:
186 802.1X – Technical Guideline
Advanced Settings
Command base-URL:
Complete URL:
Command:
= AUTHENTICATED(AUTH-FAIL-VLAN)
= IDLE
= N/A
= 3600 Seconds (Locally Configured)
= Reauthenticate
= 3224 Seconds
= AUTHORIZED(AUTH-FAIL-VLAN)
= 2
= 2
= Single
= Auto
= Both
= 1 Seconds
= Enabled
= 3600 Seconds
= 30 Seconds
= 30 Seconds
= 30 Seconds
= 251
= 252
= Disabled
of the Barracuda NG Access Monitor.