Barracuda Networks NG Network Access Client SP4 Administrator's Manual page 113

In the
Network Objects
preconfigured.
Dynamic objects are updated at runtime when network configuration changes and cannot be edited manually. For
dynamic update to work, Automatic Adapter Assignment must be selected in the Firewall Settings (9.4.1 Firewall
Menu, page 91).
•
The localIP object contains all IPs that are configured on
to the Net-Broadcast object.
•
The virtualIP object contains the IP address assigned from the VPN server. The virtual IP is
only available in case of established VPN connections.
•
These objects contain the network addresses of each specific adapter available on the sys-
tem. The Network Connection name is retrieved from the Microsoft Windows Network Con-
nections view (available through
The "logical" Microsoft Windows name, which dependents on the operating system's language version and not
the device name, is applicable for object naming.
Net-[Network Connection name]
•
The
0.0.0.0/0).
•
Use the
pendent on assignment of an adapter as trusted or untrusted (9.8.6 Adapters, page 108).
When an adapter is specified as trusted the IP addresses living on it are added to the Trust-
edNet object. Vice versa they are deleted from it, when trust assignment changes to untrust-
ed. The TrustedNet object is also updated when IP address configuration of a trusted
adapter changes.
•
The Net-NGVPN object contains the address of that network the
Secured Routes
•
This object contains the broadcast addresses of IP addresses configured on
ers. The broadcast addresses are calculated directly from the IPs.
•
111 Barracuda NG Network Access Client - Administrator's Guide
window, a number of
localIP
virtualIP
Net-[Network Connection name]
InterNet
object may be used for outbound connections to the Internet (network
InterNet
TrustedNet
object to refer to trustworthy networks. The content of this object is de-
TrustedNet
Net-NGVPN
are assigned to the
Net-NGVPN
Net-Broadcast
Net-Multicast
network objects (flagged with the
dynamic
Start > Control > Network Connections
objects may be used for setup of abstract rule sets.
Object.
adapters, and a reference
trusted
).
object is living in.
virtualIP
trusted
icon) are
adapt-