Barracuda Networks NG Network Access Client SP4 Administrator's Manual page 147

List 10–6 Advanced Settings tab – Tunnel Settings section
Parameter
Terminate Countdown (sec.)
[2]
After reconnect adapter reset
Connect retry time (sec) [Default: 60]
Fallback Profile
Always Connect
List 10–7 Advanced Settings tab – Always Connect section
Parameter
Disable Active Directory Scan
[Default: No]
User Interface Settings
List 10–8 Advanced Settings tab – User Interface Settings section
Parameter
Remember logon user name
Show Popup
[Yes]
Close after Connection
[No]
Save new Certificate Unattended
[No]
section:
OS Settings
List 10–9 Advanced Settings tab – OS Settings section
Parameter
Start Script
[-]
Stop Script
[-]
Disconnect when user logs off
[Yes]
Enable MS Logon
[No]
Certificate Store Flag
Certificate Store
[MY]
145 Barracuda NG Network Access Client - Administrator's Guide
Description
Period in seconds to wait until a VPN connection is terminated.
Reset the virtual adapter after reconnecting. This may help resolving connectivity issues.
A timeout period in seconds which will be used for reconnection attempts to the given profile. The lower this
value is, the faster the connection to the fallback profile will be established, if defined. Recommended value:
60.
Fallback profiles can be defined here. These will be tried next if a connection to the respective profile cannot
be established.
section:
Description
Direct Access can be disabled if an Active Directory is found within the currently active connection. This
ensures in office environments that the local WiFi is used by preventing a search for different gateways upon
disconnecting. Recommended value: No.
section:
Description
The VPN connection GUI remembers the last entered user name.
For security reasons, this parameter is disabled by default.
Specifies whether pop up messages are displayed for incoming and outgoing connections.
Causes the VPN client dialog to close as soon as a VPN connection has successfully been established.
Locally save new certificates without any user interaction.
Description
Define scripts to be started automatically on connecting (e.g. to automatically modify Internet Explorer
settings).
The behavior expected when logging off from Windows
When set to Yes, then the VPN connection is terminated on performing a system logout.
If set to No, then the VPN connection remains active.
Causes the user/password credentials entered during the log-in procedure on the Windows system to be
sent automatically to the Barracuda NG Firewall Smart/Secure Connector.
Note:
On establishing a VPN connection, these credentials are automatically used for authentication.
Using other credentials than these is not possible.
Assign the certificate location within Microsoft Windows' Certificate Management store.
Assigns the certificate location within Microsoft Windows' Certificate Management store.
(Start > Log Off):