Connecting And Disconnecting Using The Barracuda Ng Vpn Client; Remote Domain Logon (Pre-Logon); Remote Vpn (Rvpn) - Barracuda Networks NG Network Access Client SP4 Administrator's Manual

12.2.2

Connecting And Disconnecting using the Barracuda NG VPN Client

To connect using the Barracuda NG VPN Client, double-click the corresponding shortcut (if available)
or select the connector in
and click to start the VPN tunnel.
OK
To disconnect, double-click the corresponding shortcut (if available) or select the connector in
>
Control Panel
12.2.3

Remote Domain Logon (Pre-Logon)

As soon as a Barracuda NG VPN connector has been created, Remote Domain Logon from the
Windows login screen becomes possible with prior dial-up connection.
Select the checkbox
VPN connector connection profile from the list. Dial-up connection and tunnel are going to be
established successively during logon process to your PC, enabling access to an otherwise
inaccessible domain.

12.3 Remote VPN (rvpn)

Remote VPN allows connecting/disconnecting automatically via script. rvpn.exe is downloadable
from Barracuda Networks.
1.) Create a VPN Profile
First, you must configure the required profile as described in the previous chapter ( VPN Component
Configuration, page 124).
2.) Allocate the Profile in the Windows Registry
Open the registry (regedit) and change into the folder
Barracuda Networks
3.) This directory contains an explicit directory for each VPN profile.
The sequence in the registry (1, 2, 3, ...) does NOT match with the sequence in the NG VPN Client User Interface.
Have a look at the Description entry in the registry in order to find out which profile number matches the required VPN
profile.
4.) Create an rvpn Profile
An rvpn profile contains several parameters that determine the actions to be taken when a profile is
executed:
List 12–1 Parameters contained in an rvpn profile
Parameter Description
Connect [number of retries - default 1]
-c [X]
169 Barracuda NG Network Access Client - Administrator's Guide
>
Start Control Panel
and click
Network Connections
Log on using dial-up connection
>
Barracuda NG VPN
>
Network Connections
.
Disconnect
when logging on to your PC and select the desired
HKEY_USERS
> .
Profile
. Enter the necessary information
> >
.DEFAULT
>
Start
>
Software