section:
Secure Routes
If secured routes have been assigned to the client by the VPN server, then their values will
be displayed in the fields
tab:
Connection
Connection
•
Status information on the current connection, may it be active, initiating or shutting down.
•
The uptime for the current connection.
•
The VPN server to which the client currently is connected.
•
Local time on the VPN server.
•
Enable or disable compression.
•
If this is enabled, then only network resources available through the VPN can be accessed.
•
The client's IP address within the VPN.
Activity
•
Amount of traffic transferred so far during the current session.
•
Graphical representation of the currently used bandwidth.
tab:
My Account
Authentication
•
The currently method for authentication used for the currently established connection.
Shows a respective status message if the VPN connection is not active.
In the same section below the authentication scheme entry, a set of properties for the
currently active auth scheme will be displayed, such as user name or certificate information.
Data integrity and encryption
•
The currently used auth algorithm.
•
The currently used encryption algorithm.
135 Barracuda NG Network Access Client - Administrator's Guide
Network
section:
Status
Duration
VPN Server
VPN Server Time
checkbox
Compression
Exclusive Network Access
Client IP
section:
Bytes Sent, Bytes Received
Bandwidth
section:
Authentication scheme
section:
Authentication Algorithm
Encryption Algorithm
and
.
Subnet Mask
checkbox
Need help?
Do you have a question about the NG Network Access Client SP4 and is the answer not in the manual?