Configure A New Profile Manually - Barracuda Networks NG Network Access Client SP4 Administrator's Manual

You can later call the wizard again by right-clicking
profile entry.
Fig. 10–6 VPN Profile Wizard - Modify Existing Profile Using the Wizard

10.2 Configure a New Profile Manually

Double-click the
component. This will bring up the client's status window which is attached to the tray.
Fig. 10–7 VPN client – tray status window
Clicking
Connect
window.
127 Barracuda NG Network Access Client - Administrator's Guide
Barracuda NG Network Access Client
(altered by
Disconnect
Modify Profile (Wizard) ...
icon ( ) in the system tray to open the VPN
, if already connected) will open the client's configuration
at the respective VPN