Rule Tester - Barracuda Networks NG Network Access Client SP4 Administrator's Manual

9.8.11

Rule Tester

The
Rule Tester
Fig. 9–26 Rule Tester
The following entities are available for rule testing:
List 9–9 Rule Tester parameters – section TEST CONNECTION
Parameter Description
Direction This is the direction of the traffic policy
Application To query for an arbitrary application leave the asterisk (*), which is set as default value. Click the
Update Applications
From: IP / Port Insert Source IP and corresponding connection port. Click the
Protocol Specify which protocol to test. Click the
ICMP into the list.
Time (optional) Insert day of the week and time (optionally). Click the
User (optional) Select an User from the list (Optionally). Click the
Adapter Select an adapter from the list (Optionally). Click the
(optional)
118 Barracuda NG Personal Firewall
view allows testing rule sets for consistency.
to reset the field to the default value.
(Incoming or Outgoing).
From or To
Protocol link and select Show all Protocols
Time link and select
User link and select Update Users
Adapter link and select
Application
link to Swap IP and/or Port information.
to include other protocols than TCP/UDP and
Insert current Time to insert current day and time.
to clear the field.
Update Adapters to clear the field.
link and Select