Networks - Barracuda Networks NG Network Access Client SP4 Administrator's Manual

The following options are available:
List 9–8 Edit/Create Adapter Object options
Parameter Description
Name Specify a name for the adapter object.
Comment Optionally, insert an adapter description
Trust Type Select
Administration
Untrusted.
Note:
When later changing the setting from
Trusted Network
Status This is a read-only field displaying the connection status of the adapter object.
IPs This is a read only field, displaying the IPs assigned to the adapter object.
Adapter Select network adapter you wish to create the adapter object for. Click
Ref Select network reference you wish to create the adapter object for. Click
9.8.7

Networks

The Networks view facilitates IP address/network management. Use the Networks window to
•
•
For a clearly arranged network management rather make use of referencing Network Objects than explicit IPs when
configuring firewall rule sets.
Fig. 9–21 Network Objects window
110 Barracuda NG Personal Firewall
Trusted to add a reference to the adapter object to the network object that has been defined as Trusted Network in the
Trusted Network
> Firewall Settings (
Trusted
object. References to
assign names to single IP addresses
combine multiple IPs/networks/References into networking objects
, page 120). If you do not want to create a reference, select
to Untrusted, the reference to the adapter object is automatically deleted from the
Untrusted
adapter objects may not be added to the
New
New
Trusted Network
to add your selection to the Adapter
to add your selection to the Adapter
object manually.
list.
list.