Settings - Barracuda Networks NG Network Access Client SP4 Administrator's Manual

11.3.9 802.1X Settings
11.3.10 IEEE 802.1X Authentication
This option enables or disables the use of 802.1X authentication. When enabled, the Client will
automatically start a wpa_supplicant for all network interfaces configured to use 802.1X authentication.
To edit this option manually, modify the following registry key:
Table 11–10
Registry entry for 802.1X authentication
Item Description
Path
HKEY_USERS\.Default\Software\phion\phionvpn\settings
Key 8021XMonitor
Value (Default=1)
0 - disabled
1 - enabled
11.3.11 IEEE 802.1X DHCP Renew
When 802.1X DHCP Renew is enabled, a DHCP request packet will be sent to obtain a new IP
address, whenever a VLAN is assigned to the client computer by the switch.
To edit this option manually, modify the following registry key:
Table 11–11
Registry entry for 802.1X DHCP Renew
Item Description
Path
HKEY_USERS\.Default\Software\phion\phionvpn\settings
Key 8021XEnableDHCPRenew
Value (Default=1)
0 - disabled
1 - enabled
11.3.12 Allow Emergency Network Adapter Repair
This option enables the button for
Monitor -
Health Agent
being reset and will receive a new IP if the network interface is configured to use DHCP.
IEEE 802.1X DHCP Renew
Option
To edit this option manually, modify the following registry key:
Table 11–12
Registry entry for emergency network adapter repair
Item Description
Path
HKEY_USERS\.Default\Software\phion\phionvpn\settings
163 Barracuda NG Network Access Client - Administrator's Guide
Emergency Network Adapter Repair
view. By clicking the button all network interfaces enabled to use 802.1X are
must be enabled in order to allow emergency network adapter repair.
in the Barracuda NG Access