Web Interface; Web Interface Menu - Axis T8504-E User Manual

AXIS T8504–E Outdoor PoE Switch

Web interface

Web interface

Web interface menu

Status
Go to Status to view the unit status. The page is updated automatically every few seconds.
Note
The Ethernet network link is always enabled, regardless of PoE configuration (enabled or disabled).
Parameter
Network
Status
Power usage
PoE reset
Total power usage
Basic
Go to Basic to view basic information about the product.
IP address in use - Go to IP address in use to view information about IPv4 and IPv6 addresses, masks, default gateways and
Domain Name Servers (DNS).
Product information - Go to Product information to view general product information such as product name, serial number,
software version and PoE firmware version, and SFP module information such as SFP type, vendor, part number and serial number.
Description
Blue symbol — PoE power is provided
Gray symbol — No PoE power
Blue symbol — PoE port is enabled
Gray symbol — PoE port is disabled
Blue symbol — Ethernet link is on
Gray symbol — No Ethernet link
Blue symbol — SFP module is inserted into the uplink port
Gray symbol — Uplink port has no SFP module inserted
Reports the Ethernet link speed (10/100/1000 MB) and if the network connection is up or down
Reports the PoE port status, if it is enabled, disabled, delivering power, etc.
Reports the actual power consumption and the maximum power it can deliver
Click Reset to turn off the PoE port power and restore the PoE power back on.
Note
A PoE port which is disabled by SSH or SNMP will be enabled after a PoE reset.
Reports the aggregated power consumed by all PoE ports and the percentage of the consumed
power relative to the internal power supply power capabilities.
9