Axis T8504-E User Manual page 17

AXIS T8504–E Outdoor PoE Switch
SSH serial interface
7. Reset unit
8. Enable/Disable auto ping
default gateway to ensure network
connectivity
Ping remote host
Go to Ping remote host to test network connectivity issues.
Reset the entire unit including the internal network manager, PoE controller and internal
Ethernet switch.
Enable or disable auto ping to default gateway. When enabled, the unit verifies proper
network connectivity by pinging default gateway every 12 seconds (IPv4 DGW or IPv6
DGW). After 10 consecutive ping failures, network management module resets itself
without affecting PoE ports.
17